Bonsai pot (Unglaced, Dark-grey, Oval), handmade, with the size of: 34cm length, 25.5cm width, 8cm height.
Quality: Handmade, low quality. Not suitable for high quality bonsai. Sufficient for the cultivation of prebonsai.
Purpose: This bonsai pot was densely fired in a gas kiln. This makes it very resistant to frost in winter and so it can be primarily used for potting outdoor bonsai trees.
Height of the bonsai pot (Inside): 7cm
Color: Dark-grey (Due to the nature of the clay, the color may have slight variations according to the photo)
Drainage holes: Available. Good drainage reduces root damage (root rot).
Wire Holes: Available. Enable a good fixation of the root ball when repotting. As a result, the bonsai grows better.
Production method: The body of this handmade bonsai pot was created with the help of a plaster mould. Than the raw body was smoothed acurately by hand. During drying it was corrected several times. Than it was burned in a gas kiln at a temperature of about 1230°C. Due to the manufacturing process, deviations in the dimensions are minimal. Due to the high temperature in the kiln, the pot is fired tightly (the ceramic no longer absorbs water) and is frost-resistant.
Material: Special clay for bonsai pots from Yixing
Due to the manufacturing process, deviations in the dimensions are minimal.
If not differently declared the length data are outside dimensions.